A selection of flags, burgees and bunting for boaters and waterways events.

  • Small IWAI Ensign.  Suitable for smaller sized boats. 24″ x 18″. Sewn Polyester flag with bolt-rope sewn in. Usually flown from the stern of the boat. Often paired with the IWAI burgee flown from the mast. You MUST supply the name of the vessel on which this ensign will be flown.  Either include the name in the comment field for the order or send an e-mail to memsupplies@iwai.ie.
  • Large IWAI Ensign.  Suitable for medium-large sized boats. 36" x 24". Sewn Polyester flag with bolt-rope sewn in. Usually flown from the stern of the boat. Often paired with the IWAI burgee flown from the mast. You MUST supply the name of the vessel on which this ensign will be flown.  Either include the name in the comment field for the order or send an e-mail to memsupplies@iwai.ie.
  • Extra-Large IWAI Ensign.  Suitable for largest boats and barges sized boats. 48"x36". Sewn Polyseter flag with bolt-rope sewn in. Usually flow from the stern of the boat. Often paired with the IWAI burgee flown from the mast. You MUST supply the name of the vessel on which this ensign will be flown.  Either include the name in the comment field for the order or send an e-mail to memsupplies@iwai.ie.  
  • IWAI Burgee

    20.00
    IWAI's burgee is green and silver - inspired by the book of the same name. Wear it with pride and promote the association. Many IWAI boats also fly the defaced Ensign from the stern of the boat.
  • This striking burgee signifies that you have passed the IWAI/ISA Certificate of Competency for Motor Cruising on Inland Waterways. Appropriate Certificate must be supplied with order - this can be done by snail mail or the cert may be scanned/photographed and sent to memsupplies@iwai.ie Unfortunately we can only accept the IWAI/ISA Certificate of Competency for Motor Cruising on Inland Waterways for this burgee. There is a list of training providers on the training pages of the website and for those with adequate experience, it is possible to obtain the certificate by "direct assessment" rather than doing the full course.
  • There has been debate over the years as to the correct way to fly the Erne Flag. Some argue "Green to the ground and blue to the sky". However the accepted way is for the green stripe to be on top representing the land and the blue on the bottom representing the water. As the source of the Erne is in the Republic of Ireland with the main loughs in Northern Ireland, a more cynical interpretation is that the flag was designed to not offend anybody in that it is neither green/white/orange or red/white/blue!!! This flag is constructed of woven polyester and is approximately 24" x 36". Its designed to be flown green uppermost but you can fly it the other way if you wish ! Generally flown from the stern of the boat.
  • There has been debate over the years as to the correct way to fly the Erne Flag. Some argue "Green to the ground and blue to the sky". However the accepted way is for the green stripe to be on top representing the land and the blue on the bottom representing the water. As the source of the Erne is in the Republic of Ireland with the main loughs in Northern Ireland, a more cynical interpretation is that the flag was designed to not offend anybody in that it is neither green/white/orange or red/white/blue!!! This flag is constructed of woven polyester and is approximately 12" x 18". Its designed to be flown green uppermost but you can fly it the other way if you wish ! It can be flown from the stern of a boat or used as a burgee and flown from the mast.
  • Specially designed for Lough Derg Branch IWAI, this flag is approximately 1m wide by 600mm high, printed in white on a green background. Single sided. Polyester material with sewn edge and bolt rope.
  • Specially designed for Lough Derg Branch IWAI, this burgee is approx 480mm wide by 300mm high, single-sided printed in white on green, polyester material with a bolt rope sewn in.
  • Very large Code Flag "V" - I require assistance. Display this flag when it all goes pear-shaped and you need to attract attention. Knitted polyester flag approx 3ft x 4ft6in. Red X printed on white background. Bolt rope sewn in on LHS with 12" tails top and bottom. Brass eyelets sewn in on both RH corners allowing you to spread the flag out and secure it on the side or top of the boat for maximum exposure.
  • Carrick on Shannon Branch Burgee. 360mm in the hoist and 560mm in the fly. Applique & embroidery type burgee inspired by the design of the old "Corporatione Seale of Carrel-on-Shannen" now in St. George's Church heritage and Visitor Centre, Carrick on Shannon. The twin towers are those of Carrickdrimriske Castle
  • Boyne Navigation Branch Burgee. Triangular shape 310mm x 515mm. Yellow, Green and Silver printed on white background. Double thickness. Bolt rope and toggle included.

Title